CE, RoHS
Compliance tested and documented per batch
IP54 Filter Fans for Electrical Cabinets
For dusty floors and production halls: an IP54 filter fan with a replaceable screen keeps the airflow and keeps the dust out. AC220V and DC24V versions, up to 550m3/h. Model FK6623 is the stock answer for control cabinets in manufacturing plants.
Cool Air In, Dust Out
A control cabinet on a production floor pulls in dust with every breath of air, and dust settles on contacts until a failure shows up. The IP54 filter fan solves both sides of the problem: it moves up to 550m3/h and a replaceable screen keeps the dust out.
Panel cut-out mounting, the filter on the intake side. Replace the screen when airflow drops, typically every 3 to 6 months in a dusty hall, and the screen clips out without tools. AC220V and DC24V versions cover most panels, with DC48V available for larger systems. Operating range -20C to +60C.
How to Choose a Filter Fan, Full Selection Guide
Choose IP54, and size airflow by dividing cabinet heat in watts by 20-30 to get required m3/h.
Choose the IP55 version for weather and spray resistance.
Choose the DC24V variant to match storage and telecom DC buses.
Send the heat load, voltage and environment. NOXT confirms the filter fan model within 24 hours.
3-year warranty
Covered on every filter fan
Replaceable screen
Tool-free clip-out maintenance
IP54 / IP55
Dust and weather protection
Inquiry FAQ
Depends on environment; typical service interval 3-6 months in dusty halls. Screens are low-cost and clip out without tools.
Up to 550m3/h covers most control cabinets. For higher loads, step up to the axial fan or add a second fan for push-pull airflow.
Yes, DC24V matches storage and telecom DC buses; request the DC48V variant for larger systems.